Ercolina’s Erco Bender 65 comes equipped with a 3 axis mandrel bender with an extended bending head capable of bending complex shapes and profiles; the EB65 will consistently produce quality bends in steel, stainless, aluminum, titanium and brass.
| Material Type | EB65 |
|---|---|
| Max. Tube Capacity – Mild Steel Stainless Square Tube |
2 1⁄2′′ (.083 wall) 2 1⁄2′′ (.065 wall) |
| Max Pipe Capacity | 1 1/2″ Sch. 40 |
| Max Bending Radius | 9.8″ |
| Min Bending Radius | 1.5 x Ø |
| Max Shaft Rotation | 210° |
| Max Bending Angle | 185° |
| Max Tailstock Capacity | 2 1/2″ |
| Interactive Touch Screen Control | 10″ Color Screen |
| Max Material Length – Standard Table Optional Table Extension |
13′ 21′ |
| Minimum Underhead Swing Clearance | 14.5″ |
| Length of Bending Head | 59″ |
| Maximum Carriage Travel | 125″ |
| Number of Programs | Unlimited |
| Precision of Bend Angle | +/- .5° |
| Power | Three Phase 480V |
| Dimensions (Height x Width x Length) | 52″ x 44″ 205″ |
| Weight | 7,200 lbs |
All capacities based on mild grade materials; heavy wall and high tensile materials reduce machine capacity.
For your convenience, there are instruction and service manuals for Ercolina Benders below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.
Features of Ercolina’s Erco Bender CNC Mandrel Bender
https://youtu.be/QqISr6_48-U
