- Manufactured in the U.S.A.
- PLC Controlled, full cycle semi-automatic operation
The PLC controller is factory programed and manages the raise and lower functions of the saw head and the open and close functions of the vise jaw in a programmed sequence. In high volume operations this increases productivity and reduces operator fatigue and error
Full cycle operation:
• at the end of the cut the saw head rises to a pre-selected level
• the vise opens
• the operator advances the stock and presses the “Automatic” button
• the vise closes and the saw head approaches and makes the next cut - True swivel head miters to 60° – no need to swivel the stock
- Saw head swivels on precision ball bearings
- Large protractor for accurate angle selection
- Wet cutting system with full surround pan
- Rigid welded steel frame with precision ground bed and vise jaws
- Infinitely variable blade speeds
- Combination reduction gearbox and perimeter ring gear blade drive
- Powered frame raise and air powered quick position vise control
- Variable hydraulic feed rate control with counterbalance spring
- Zero clearance carbide guides with rollers with pre-loaded spring
- Rite-Tension® Blade tensioning device
- Powered blade brush
- Auto shut-off at end of cut
- Adjustable stock stop
- Flood coolant system with 8 gallons tank capacity and submersible pump
- Magnetic starter with overload and undervoltage protection
- 110 Volts at controls
- OSHA Blade guarding
Menu
- (833) 524-2525
- admin@fabtechsolutions.com
