Veteran Owned Business

Piranha Ironworker Model P-140

Our Price: $49,995.00

The P-140 Piranha Ironworker is the top of it’s class. It can perform all the functions commonly expected from ironworkers; bending, punching, notching, and far more. This Ironworker’s versatility will boost shop productivity by allowing for a large number of tasks to be finished quickly and easily. The Model Number, indicates the punch capacity as measured in tons.

MegaFab P-140 Single Operator Ironworker

The Piranha Ironworker P-140 comes with more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper and notcher. Piranha’s innovative integrated coper and notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part – from any angle.

The dovetail slide allows an operator to switch from punching to bending in just a few seconds. Furthermore, the P-140 has full electrical control of its stroke with a foot switch and limit switch stroke controls for fast punching cycles. The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-140’s capabilities.

Piranha Ironworker Standard Features:

  • Complete Punching Attachment with split dove tail mounting
  • 5 Punch and Die sets
  • Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
  • Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
  • Remote Electric Foot Switch that can be connected at either end of the machine
  • Electric Limit Switches that can be set for stroke control when using foot control
  • Set of Round Bar Knives [2 way] (customers choice to 2)
  • Set of 16.625 Plate Shear Knives [4 way]
  • Set of 20.5″ Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625″ Plate Shear Knives)
  • Extra Blank Knife to extend shear to 20.5″
  • Set of Angle Knives [8 way top] [4 way bottom]
  • Set of Coper Knives [2 way top] [4 way bottom]
  • Chip Buckets (2 each)
  • Extra Oil Filter
  • Coupling Wrench & 3/8″ Allen Wrench
  • Integral Lifting Lug for instant portability

Detailed Specifications

Throat Depth 12″ Coper-Notcher (Tons)
4″ x 6″ x 3/8″
Open Height 15-1/2″ Bending Attachment
12″, 24″
Closed Height
w/o Die Block
10-1/4″ Punch End – Strokes Per Minute
Optional Speed-Up Kit
30 @ 3/4″
35 @ 3/4″
Stroke Length 5-1/4″ Work Station Height
Platen Table Size (D-W) 14-1/2″ x 21″ Hydraulics
Pump GPM
System R/V PSI
Hole Size (Max. Material)
Max. Hole Size (Material)
140 Tons
1-3/4″ (1″)
5″ (5/16″)
Fluid Capacity (gal.) 25
Plate Shear 20-1/2″ Long
1″ x 14″
3/4″ x 18″
1/2″ x 20″
Motor Std. 230/460 3 Ph.
1800 RPM
Opt Phase & Voltage Available
15 HP 3 Ph.
Angle Shear 6″ x 6″ x 5/8″ Dimensions (Net)
W-L-H Approx.
35″ x 90″ x 68-1/2″
Bar Shear
Round (min. to max.)
Square (min. to max.)
1/2″ to 2″
1/2″ to 1-3/8″
Weight (Net)
Lbs. Approx.

Repair & Service

Operators Manual
Piranha Ironworker
Maintenance Checklist
Ironworker Preinstallation
Ironworker Parts, Filter List
thumbnail of Ironworker_Punch_Tonnage_Chart
Ironworker Punch
Tonnage Chart

Still looking for what you need?