Trim cuts and remnants are separated from good parts automatically via a heavy-duty discharge sorting chute. Designed for operator safety, this machine is completely enclosed and features safety door interlocks which if a door opens during operation, the machine will shut off.
Featuring a 0.4” – 3.15” round capacity at 90°, 15 HP motor, and a 285 mm blade, the CSNC-80 is a versatile high-speed cutting machine.
Standard Features:
Mitsubishi PLC Controller allows for 200 programs to be saved
- Job monitoring with cycle time, job duration, parts count and AMP load setting to protect the saw blade.
Material library with US steel grades menu with ability to add custom material grades
Bar feed features a material gripper feed carriage indexing via ball screw and AC servo drive. Shuttle speed: 7.87” per second.
Heavy duty saw head is driven by ball screw and AC servo drive
Mist exhaust system
- Patent pending blade cooling system.
Bar retracts automatically for contact free return stroke of the saw blade
Universal Bar Loader for round and square material with safety guard sheets provides inclined storage width of 27.9” (710 mm) for rounds, manual incline setting. Capacity: 3,748 lbs.
- PLC controlled automatic oil lubrication of all moving parts
Output sorting ensures trim cuts and remnant pieces are sorted automatically from good parts
Variable vise pressure control with dial gauge – two stations
- Cooling nozzle
Blade lubrication features triple jet system to lubricate blade. If the coolant level gets low, the machine will alarm to alert the operator.
Hydraulic rotating wired chip brush rotates in both directions for proper chip removal
Status light indicating tower
Chip auger
Air cooled electric magnetic head break removes all backlash.
Built in hydraulic tank and power pack
Tool steel hardened saw guide plates
Power transformer
Four blade starter package
• Blade specs: 285 mm x 2.0 kerf x 1.70 mm body x 32 mm bore
• Pin holes: 4/9/50 mm
• Bolt holes: 4/11/63 mm
Optional Features:
PLC program modification
Chain chip conveyor
Universal Hydraulic incline adjustment bar loader
2 ton- chain and finger bundle unscrambler
Maintenance kit
Motorized sliding out-feed conveyor table and guarding in the following lengths – 1000 mm, 2000 mm, and 3000mm
Imperial Specifications
| Cutting Capacity Round 90° | 0.4″-3.15″ |
| Cutting Capacity Square 90° | 0.4″-2.36″ |
| Blade Drive | 15 HP VFD |
| Blade Speed | 50-200 MPM |
| Blade Size | Carbide/ Cermet tipped: 285 mm x 1.7 mm kerf |
| Bar Stock Length | 10′-20′ |
| Trim Cut | Zero or programmable from 0.4′ or longer |
| Cut off Length | Min 0.24” up to 39” |
| Single Stroke | 40″ |
| Remnant Length | 3.35” + cut length + cutter thickness |
| Hydraulic Motor | 3 HP |
| Bar Loading Magazine | Inclined storage width of 27.9″ for rounds |
| Machine Capacity | 6,613 lbs. |
| Machine Weight | 6613 lbs. |
| Dimensions (w x l x h) | 85” x 102” x 88″ |
Metric Specifications
| Cutting Capacity Round 90° | 10-80 mm |
| Cutting Capacity Square 90° | 10-60 mm |
| Blade Drive | 11 kW |
| Blade Speed | 50-200 MPM |
| Blade Size | Carbide/ Cermet tipped: 285 mm x 1.7 mm kerf |
| Bar Stock Length | 3-6 m |
| Trim Cut | Zero or programmable from 10 mm or longer |
| Cut off Length | Min 6 mm up to 1000 mm |
| Single Stroke | 1000 mm |
| Remnant Length | 85 mm + Cut Length + Cutter Thickness |
| Hydraulic Motor | 2.2 kW |
| Bar Loading Magazine | Inclined type with storage width of 710 mm |
| Bar Loader Capacity | 1700 kg |
| Machine Weight | 3000 kg |
| Dimensions (w x l x h) | 2150 mm x 2585 mm x 2245 mm |
CARBIDE SAW PARTS AND SERVICE
Photo Gallery
