FABTECH SOLUTIONS

Veteran Owned Business

Piranha B Series Plasma Tables

Get a Quote!

Megafab’s new B-Series Plasma Table is more affordable than previous models, its a perfect addition to your machine shop. This Piranha B-Series Table retains a lot of the high end features found on the C-Series table. While trimming the extra features that are not needed when performing lighter duty cutting cycles.

Category
  • Rugged Construction – Simple and rugged bolted table with high accuracy linear guides and bearings. Machine is assembled complete at the factory
  • Dual Side Drive – gantry driven on both sides for maximum stability
  • CNC Control with 10.4″ High resolution color LCD monitor, shape library with 20 configurable shapes, 8MB memory & USB interface
  • Stepper motors and drives – Stepper motors on both X-axis and Y-axis with a maximum traverse speed of 8000mm/min.
  • Water table slag collection – eliminates need for dust collector.
  • MicroStep Programmable Torch Height Control – controls torch height automatically
  • Breakaway Torch Mounting – protects the torch from inadvertent part tip-ups
  • ProNEST® 2019 LT Programming System – 2D CAD drawing, DXF importing, integrated shape library, drag and drop nesting.
  • NOTE: Add-on modules are available for additional functionality of ProNEST® LT

MACHINE SPECIFICATIONS

  • Maximum Rapid Speed: 314 IPM
  • CNC Control: Starfire
  • Frame and Bridge Construction: Fabricated machine table, Welded steel bridge
  • Torch Control: Arc Voltage with Initial Height Sensing
  • Torch Protection: Pneumatic Breakaway

Drive Motors:

  • X-axis Two Servo Motors
  • Y-axis – Servo Motor
  • Torch Height Control – Stepper Motor

Drive System:

  • X-axis – Rack and Pinion each side
  • Y-axis – Rack and Pinion
  • Z-axis – Ball Screw

 

Piranha B-Series Product Comparison

Piranha B-Series Plasma Cutting Table

Available Models Piranha B404 Piranha B408 Piranha B510
Cutting Areas 4’ x 4’ 4′ x 8′ 5′ x 10′
Machine Sizes* 404: 82″L x 92″W x 60″H 408: 138″L x 92″W x 60″H 510: 158″L x 102″W x 60″H
Machine Weights 404: 1,300 lbs 408: 1,700 lbs 510: 2,200 lbs

AVAILABLE PLASMA SYSTEMS

HYPERTHERM PLASMA SPECIFICATIONS

 

MATERIAL THICKNESS MAXIMUM CUTTING SPEED
10 GA MS 181 IPM
1/4″ MS 72 IPM
3/8″ MS 38 IPM
1/2″MS 24 IPM
GAS TYPE AIR NITROGEN
Gas Quality Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 99.95% pure
Recommended gas inlet flow and pressure 400 scfh @ 85 psi (190 slpm @ 5.9 bar)

Power Connections for the Powermax 45XP (CSA Models)

INPUT VOLTAGE INPUT CURRENT AT RATED OUTPUT (A) INPUT CURRENT AT ARC STRETCH (A) FUSE/BREAKER SIZE  (SLOW-BLOW) (A)
200-240V SINGLE PHASE 39 44 50A
208V SINGLE PHASE 37 43 50A
480V THREE-PHASE 9.4 17 20A
NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 809240 Revision 1
MATERIAL THICKNESS MAXIMUM CUTTING SPEED
10 GA MS 224 IPM
1/4″ MS 116 IPM
3/8″ MS 62 IPM
1/2″ MS 40 IPM
5/8″ MS 26 IPM
GAS TYPE AIR NITROGEN
Gas Quality Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 99.995% pure
Recommended gas inlet flow and pressure Cutting: 400 scfh @ 85 psi (190 slpm @ 5.9 bar)

Power Connections for the Powermax 65 (CSA Models)

INPUT VOLTAGE INPUT CURRENT AT RATED OUTPUT (A) INPUT CURRENT AT ARC STRETCH (A) FUSE/BREAKER SIZE  (SLOW-BLOW) (A)
200-208V SINGLE-PHASE 52 74 80
230-240V SINGLE-PHASE 44 74 80
480V SINGLE PHASE 22 38 40
200-208V THREE-PHASE 32 45 50
230-240V THREE-PHASE 27 45 50
400V THREE-PHASE 15 27 30
480V THREE-PHASE 13 23 25
600V THREE-PHASE 13 23 25
NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 806650 Revision 3
MATERIAL THICKNESS MAXIMUM CUTTING SPEED
10 GA MS 336 IPM
1/4″ MS 164 IPM
3/8″ MS 80 IPM
1/2″ MS 48 IPM
5/8″ MS 30 IPM
3/4″ MS 24 IPM
GAS TYPE AIR NITROGEN
Gas Quality Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 99.995% pure
Recommended gas inlet flow and pressure Cutting: 400 scfh @ 85 psi (190 slpm @ 5.9 bar)

Power Connections for the Powermax 85 (CSA Models)

INPUT VOLTAGE INPUT CURRENT AT RATED OUTPUT (A) INPUT CURRENT AT ARC STRETCH (A) FUSE/BREAKER SIZE  (SLOW-BLOW) (A)
200-208V SINGLE-PHASE 70 98 100
230-240V SINGLE PHASE 60 98 100
480V SINGLE PHASES 29 50 50
200-208V THREE-PHASE 42 60 60
230-240V THREE-PHASE 36 60 60
400V THREE PHASE 21 38 40
480V THREE-PHASE 18 31 30
600V THREE-PHASE 17 30 30
NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF:      Hypertherm Operator Manual 806650 Revision 3
MATERIAL THICKNESS MAXIMUM CUTTING SPEED
10 GA MS (85 amp process) 336 IPM
1/4″ MS 192 IPM
3/8″ MS 116 IPM
1/2″ MS 76 IPM
5/8″ MS 52 IPM
3/4″ MS 40 IPM
GAS TYPE AIR NITROGEN
Gas Quality Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 99.995% pure
Recommended gas inlet flow and pressure Cutting: 460 scfh @ 85 psi (220 slpm @ 5.9 bar)

Power Connections for the Powermax 105 (CSA Models)

INPUT VOLTAGE INPUT CURRENT AT RATED OUTPUT (A) INPUT CURRENT AT ARC STRETCH (A) FUSE/BREAKER SIZE  (SLOW-BLOW) (A)
200V THREE-PHASE 58 82 80
208V THREE-PHASE 56 82 80
240V THREE-PHASE 49 78 80
480V THREE-PHASE 25 40 40
600V THREE-PHASE 22 35 40
NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF:      Hypertherm Operator Manual 817390 Revision 2
MATERIAL THICKNESS MAXIMUM CUTTING SPEED
10 GA MS (65 amp process) 296 IPM
1/4″ MS 225 IPM
3/8″ MS 138 IPM
1/2″ MS 93 IPM
5/8″ MS 66 IPM
3/4″ MS 48 IPM
GAS TYPE AIR NITROGEN
Gas Quality Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 99.995% pure
Recommended gas inlet flow and pressure Cutting: 550 scfh @ 85 psi (260 slpm @ 5.9 bar)

Power Connections for the Powermax 125 (CSA Models)

INPUT VOLTAGE INPUT CURRENT AT RATED OUTPUT (A) INPUT CURRENT AT ARC STRETCH (A) FUSE/BREAKER SIZE  (SLOW-BLOW) (A)
480V THREE-PHASE 31 50 50
600V THREE-PHASE 24 38 40
NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF:      Hypertherm Operator Manual 808080 Revision 3

CUSTOMER PROVIDED PLASMA SYSTEMS

Piranha can integrate existing air plasma systems up to 125A. The customer must provide details and specifications on the existing air plasma system for review before Piranha can approve the integration. There will be a minimum charge of $1,000 for systems not supplied by Piranha. Charges for additional components, cables, and shipping may be required after review. Piranha will not provide any warranty on the existing system and will not guarantee the cut quality.

PRODUCT MANUALS

FABTECH SOLUTIONS provides service and repair for all Piranha Plasma Tables. Ensuring high quality replacement parts and service resources is an essential component for prolonging the life and effectiveness of your metal fabrication equipment and machinery.

For your convenience, there are product manuals for your Plasma Table included below. These manuals have been prepared for operators and maintenance personnel. It is important that all persons responsible for the care and operation of this equipment fully understand the information presented in this material. Manuals are shown for reference purposes only; please contact our Service Department with any questions or concerns.

Operators Manual

Still looking for what you need?

(833) 524-2525

Related Products

Related products

FABTECH SOLUTIONS

Service first, then sales is the philosophy that Fabtech stands by. As a veteran owned business, we believe that anyone can sell metal fabrication equipment but our ability to service non-brand specific machinery and repair metal working equipment is what keeps us unrivaled.

GET IN TOUCH
NEWSLETTER
Stay in touch with our promotions and special offers.
WE ACCEPT

©Copyright FABTECH SOLUTIONS 2024 ⁃ All Rights Reserved. Privacy Policy
Full service metal fabrication equipment distributor, specializing in metal working equipment repair or service and sales of used or new fabrication machinery.